x
Quick Log In
Please Log In to view the details of this product

   
   

LSI/3Ware 9650SE-2LP SATA2 Hardware RAID Controller, OEM

Package: OEM
Ma Labs List#: 69392
Ma Labs SKU#: 3WA965SE2S
Mfr#: 9650SE-2LP SGL
UPC Code: 693494600025

Mfr Warranty: 3 YEAR

  • Mfr Part Number: 9650SE-2LP SGL
  • Features:
    • 8th-generation StorSwitch non-blocking switched architecture
    • On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives
    • Bootable array support for greater fault tolerance
    • Variable stripe size for performance tuning by application
    • 64-bit LBA support
    • ATA pass-through mode support
    • 128MB DDR2-533 memory with ECC protection
    • 32 pooled DMA channels
    • Complete configuration management suite:
      • 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool
      • 3ware Disk Manager 2 (3DM2) - browser-based management tool
      • Command Line Interface (CLI) - scriptable configuration tool
    • SNMP support
    • SMTP support for email/pager notification
    • ATA/6 and Out of band (OOB) staggered drive spin-up support
    • Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN
    • Multiple logical unit sizes and RAID levels on one card
    • Multiple card support within a system for large storage requirements
    • Hot-swap and hot-spare support for data availability
    • Dynamic sector repair for robust data protection
    • S.M.A.R.T. disk drive monitoring for reliability
    • Emergency Flash Recovery protects against failed firmware upgrade
    • Drive activity LED support
    • Online Capacity Expansion and RAID Level Migration
    • Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal
    • Drive insertion and removal notification
    • Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane)
    • Chassis Control Unit for enclosure management via I2C
  • Port: 2x SATA, Serial ATA 2.6 Specification support
  • Host Interface: PCI-Express x1, PCI Express 1.1 compliant
  • Raid Levels: 0, 1, Single Disk, JBOD
  • Onboard Memory: 128MB DDR2-533
  • Connector Type: Discrete
  • BBU Support: No
  • BIOS PnP (plug and play) and BBS (BIOS boot specification) support
  • Power Requirements: 18W maximum
  • Form Factor: Low Profile
  • Dimensions (LxH): 7.3 x 2.73 inch / 18.54 x 6.93 cm
  • Package: OEM